View NNCD68PG_1289560.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
ESD NOISE CLIPPING DIODE
NNCD6.8PG
LOW CAPACITANCE TYPE ELECTROSTATIC DISCHARGE NOISE CLIPPING DIODE (QUARTO TYPE: COMMON ANODE) 5-PIN MINI MOLD
PACKAGE DIMENSION (Unit: mm)
2.8 0.2
DESCRIPTION
The NNCD6.8PG is a diode developed for ESD (Electrostatic Discharge) absorption. Based on the IEC-61000-4-2 test on electromagnetic interference (EMI), the diode assures an
2.9 0.2
suitable for external interface circuit protection. With four elements mounted in the 5-PIN mini mold package, the product can cope with more high density assembling.
1.9
0.95
endurance of no less than 30 kV, thus making itself most
1
5
0.95
2
3
4
* Base on the electrostatic discharge immunity test (IEC 61000-4-2), the product assures the minimum endurance of 30 kV. * With four elements in the MINI MOLD package, the product can achieve high density and automatic packaging.
1.1 to 1.4
0.8
ELECTRODE CONNECTION APPLICATIONS
* External interface circuit ESD absorption * Circuits for waveform clipper, surge absorber
5 4
0 to 0.1
1: 2: 3: 4: 5:
1 2 3
K1 A K2 K3 K4
Cathode 1 Anode (common) Cathode 2 Cathode 3 Cathode 4
MAXIMUM RATINGS (TA = 25C)
ITEM Power Dissipation Surge Reverse Power Junction Temperature Storage Temperature SYMBOL P PRSM Tj Tstg RATING 200 85 (t = 10 s 1 pulse) 150 -55 to +150 UNIT mW W
o o
REMARK Total
C C
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for availability and additional information.
Document No. D15987EJ2V0DS00 (2nd edition) Data Published September 2002 NS CP(K) Printed in Japan
The mark 5 shows major revised points.
0.16 -0.06
+0.1
FEATURES
0.32 -0.06
+0.1
1.5
0.65 -0.15
+0.1
2002
NNCD6.8PG
ELECTRICAL CHARACTERISTICS (TA = 25C) (A to K1, A to K2, A to K3, A to K4)
TYPE No. BREAKDOWN VOLTAGE VBR (V) MIN. MAX. IT (mA) TYP.
Note1
CAPACITANCE
REVERSE LEAKAGE
DYNAMIC IMPEDANCE Zz () MAX. IT (mA) MIN.
Note2
ESD VOLTAGE (kV) Condition C = 150 pF
Note3
Ct (pF) Condition
IR (A) MAX. VR (V)
VR = 0 V NNCD6.8PG 6.2 7.1 5 90 f = 1 MHz 2 3.5 40 5 30
R = 330 Contact discharge
Notes 1. Tested with pulse (40 ms) 2. Zz is measured at IT given a small A.C. signal. 3. Based upon with IEC 61000-4-2
2
Data Sheet D15987EJ2V0DS
NNCD6.8PG
TYPICAL CHARACTERISTICS (TA = 25C)
Figure 1. POWER DISSIPATION vs. AMBIENT TEMPERATURE P - Power Dissipation - mW
5
1000 100 10
Figure 2. IT - VBR CHARACTERISTICS (A-K1, A-K2, A-K3, A-K4)
250 200 150 100 50 0 0 25 50 75 100 125 150
IT - On-state Current - mA
1 0.1 0.01 0.001 0.0001 0.00001 2 3 4 5 6 7 8 9 10
TA - Ambient Temperature - C
VBR - Breakdown Voltage - V Figure 3. ZZ - IT
1000
ZZ - Dynamic Impedance -
100
10
1 0.1 1 10 100
IT - Current - mA
Figure 4. Ct - VR CHARACTERISTICS between Terminal - pF
120 100 80 60 40 20 0 0 1 2 3 4 5 6 NNCD6.8PG
Ct - Capacitance
VR - Reverse Voltage - V
Data Sheet D15987EJ2V0DS
3
NNCD6.8PG
Figure 5. TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS Zth - Transient Thermal Impedance - C/W
10000 1000C/W 1000
100
10
1 0.001
0.01
0.1
1
10
100
1000
t - Time - s
5
1000
Figure 6. SURGE REVERSE POWER RATINGS
TA = 25C Non-repetitive
100
PRSM - Surge Reverse Power - W
PRSM tT
0.01 0.1 1
10
1 0.001
10
tT - Pulse Width - ms
4
Data Sheet D15987EJ2V0DS
NNCD6.8PG
[MEMO]
Data Sheet D15987EJ2V0DS
5
NNCD6.8PG
* The information in this document is current as of September, 2002. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. * NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. * NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above).
M8E 00. 4

▲Up To Search▲

Price & Availability of NNCD68PG

	To Download NNCD68PG Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .